COGA Sound SuperSlot Wireless Sleeve

From: 175.00 USD

COGA Sound SuperSlot Receiver Sleeve — Holds any slot receiver following the Super Slot standard. Single 5-Pin or dual 3-Pin mini-XLR output.

Each unit purchased includes choice of one (1) COGA Sound clip.

Clear
SKU: COGSLVSR Categories: , Tag:

Description

COGA Sound SuperSlot Wireless Sleeve

The COGA Sound SuperSlot Receiver Sleeve holds any slot receiver following the Super Slot standard. A bezel or plate may be required for some receiver models. A DB25 connector passes audio to a single male TA5 or dual male TA3 output connectors, outputting 2-channels of analog audio or up to 4-channels of AES digital audio (on compatible receivers.) A 2.5mm x 5.5mm locking DC connector provides power. Antenna cable clips at the top securely hold RG-174 antenna cables.

Available with a 5-pin mini-XLR output connector, or optional dual 3-pin mini-XLR output connectors. With this lightweight, slim design, you will never need to swap output plates on your slot receivers again. If you do need to use a different output plate, the bottom section with connectors can be removed, allowing any Slot type receiver to easily attach anywhere you need it.

The SuperSlot Sleeve Bottom is NOT compatible with Unislot plates.

COGA Sound Wireless Sleeves

COGA Sound Wireless Sleeves are the ultimate mounting solution for wireless Receivers and Transmitters. Using the BPS clip system, Wireless Sleeves are an easy and quick addition to any sound bag, cart, remote speakers, or anything else.

Each unit purchased includes one (1) Basic clip of the customer?s choice from the list below. Additional clips may be purchased separately.

Works With (With DB25 Super Slot Adapter):

  • Audio Limited A10
  • Lectrosonics SR and DSR
  • Sennheiser EK 6042
  • Shure ADX5D
  • Sony DWR-S03D
  • Wisycom MCR42S and MCR54
  • Zaxcom SRX 220

Specifications

POWER

  • DC Power: 2.5mm X 5.5mm
  • Locking DC Connector. 18V, 350mA Max Rating
  • Connector: Switchcraft 760k

AUDIO

  • 2 Channels Analog or 4 Channels AES3 (Optionally TA5 or 2 TA3 connectors)

DB-25 Connector

  • SuperSlotTM compliant audio pass through connector

OUTPUT WIRING

  • TA3: Pin 1 – Ground, Pin 2 – (+), Pin 3 – (-)
  • TA5: Pin 1 – Ground, Pin 2 Channel 1 – (+), Pin 3 Channel 1 – (-), Pin 4 Channel 2 – (+), Pin 5 Channel 2 – (-)

Fuse

  • 0.35A Hold Current